Modern Air Filtration Corporation

Odour Control in Toronto Condo and Apartment Buildings: Find the Source Before Buying Filters

Published

By Modern Air Filtration

Odour Control in Toronto Condo and Apartment Buildings: Find the Source Before Buying Filters

Do not choose a solution before identifying the problem

A familiar pattern in property management is the complaint that “the hallway smells again.” A cleaning visit improves it briefly, then the odour returns. Staff may reach for fragrance, increase a fan speed or order a different filter. Without knowing the source and the route the air takes, each action can miss the underlying issue.

For Toronto condominiums, apartments and mixed-use buildings, an odour investigation should ask three questions: what is producing it, how is it reaching the affected space, and why is it occurring at this time? Cooking, garbage handling, moisture, cleaning products and outdoor sources require different responses.

Odour strength is not a reliable measure of health risk. Some substances are detectable at low concentrations; others, including carbon monoxide, have no smell. A pleasant scent does not establish safe air, and removing a smell does not establish that every contaminant has been removed.

Separate urgent concerns from routine complaints

If a report suggests a gas leak, fire, chemical release, carbon monoxide alarm or serious illness, follow the building’s emergency procedure and contact appropriate emergency services. Do not ask residents to remain in an affected area while staff trial a filter.

For non-emergency recurring concerns, document the exact location, time, duration and character of the odour. Ask whether it coincides with cooking, garbage collection, cleaning, construction, weather changes or equipment schedules. Record observations neutrally; an odour report does not by itself identify which resident or business is responsible.

Avoid collecting unnecessary medical information. Tell residents what will be inspected and when they can expect an update. A documented process is more useful than repeated assurances that the air “seems fine” during a short visit.

Identify likely sources and test the explanation

ObservationPossible lines of investigationWhat not to assume
Cooking smell in a corridorExhaust operation, air transfer and relevant pressure relationshipsThat one suite is at fault without evidence
Garbage smell near a lift lobbyWaste-room housekeeping, doors, exhaust and leakage pathsThat fragrance will remove the source
Musty smell near a fan coilCondensate drainage, damp materials and hidden moistureThat a carbon pad fixes water damage
Solvent or cleaning-product smellRecent work, product use, storage and ventilationThat an ordinary particle filter removes vapours
Outdoor odour near an intakeNearby exhaust, loading activities and wind conditionsThat shutting off required ventilation is safe

Use the pattern to guide inspection, not as a diagnosis. A dry floor drain, for example, may need plumbing assessment; a repeated smell during certain weather may need an intake or pressure investigation. Qualified contractors should inspect equipment and spaces outside the maintenance team’s competence.

Control sources and pathways first

Remove or contain the source where feasible. Review waste handling and cleaning practices, keep relevant equipment maintained and address moisture damage. Select lower-emitting products where practical and use them as directed. Do not mix chemicals or use ozone generators as a routine occupied-building odour treatment.

Confirm that dedicated exhaust is actually operating and that replacement air can enter as designed. Check controls and schedules as well as fans. A ventilation imbalance can allow odours to travel out of a service room even when that room has an exhaust grille.

Investigate damaged seals and unintended penetrations, but do not modify fire doors, shaft separations or designed transfer openings without professional review. Read the building-pressure guide before assuming the answer is simply “more positive pressure.”

Illustrative multi-residential maintenance image

Illustrative site-library image. Odour investigations require source and airflow checks; a filter’s appearance alone does not identify the cause.

Particle filters and carbon do different jobs

Ordinary MERV-rated filters are designed and rated for airborne particles. They may reduce the particulate component of smoke or aerosols, subject to efficiency, airflow and fit. A MERV rating does not describe removal of odour-causing gases or volatile organic compounds. A higher MERV number is not an odour-removal guarantee.

Activated carbon and other gas-phase media can capture selected gases through adsorption or related processes. Suitability depends on the particular contaminant, concentration, humidity, airflow, contact time and quantity and type of media. Some applications require specially treated media or a dedicated engineered system.

The useful life of gas-phase media is finite. Once its capacity is exhausted, performance can fall even if pressure drop has changed little. Do not use the particulate filter’s replacement indicator as the sole measure of carbon performance. Plan application-specific replacement or monitoring with the supplier and HVAC professional.

A thin carbon-coated pad should not be treated as equivalent to a deeper carbon bed. Nor should a carbon product be claimed to remove every gas. Standard HVAC filtration is not a substitute for carbon monoxide alarms, combustion safety, source removal or required ventilation.

When a gas-phase filtration enquiry makes sense

Consider specialist filtration after source and pathway controls have been evaluated, where a defined residual contaminant problem remains and the system can accommodate the solution. A vague request to “stop all smells in the building” is not enough to size equipment or assess performance.

Prepare an enquiry with the odour description, suspected or confirmed source, locations, operating hours, airflow, available installation space and pressure allowance. Include relevant investigation results rather than assuming a product category will identify the contaminant for you.

Modern Air Filtration offers carbon and chemical filtration options. Use that catalogue as a starting point for an application discussion, not proof that every product suits a condo corridor or garbage room. Ask for contaminant-specific performance information, maintenance requirements and confirmation of system compatibility.

For particulate contamination, pleated filtration may be part of the solution when correctly selected. Many real problems need both source control and suitable filtration; neither should be advertised as a universal replacement for the other.

Check results without declaring victory too early

After correcting a confirmed source or mechanical fault, repeat observations under the conditions that originally produced the complaint. A lunch-hour inspection may miss a dinner-time cooking pattern. A calm day may not reproduce a wind-driven intake issue.

Record what changed, when it changed and who verified it. Compare complaint locations and timing before and after. If instruments are used, choose them for the suspected contaminant and understand their limitations. A low-cost “TVOC” reading is not a complete identification of gases or a standalone health assessment.

Where symptoms, persistent moisture or an unresolved source remain, involve a qualified indoor air quality professional or occupational hygienist as appropriate. A persistent complaint deserves reassessment even when the first intervention was reasonable.

Communicate fairly with residents

Describe the building’s findings without naming or blaming a household on suspicion alone. Explain any access needed, the work planned and when follow-up will occur. For condominium rules or tenancy enforcement, use the proper legal and management process rather than treating an air-quality article as enforcement authority.

An effective resident update might say: “We are checking the waste-room exhaust and door condition, recording when odours occur, and will reassess after the contractor’s visit.” That is more useful and defensible than a promise that a new filter will eliminate every smell.

In mixed-use properties, coordinate with commercial occupiers and their contractors where relevant. Outdoor exhaust and loading activities can affect neighbouring intakes, but changes must be designed and authorized—not improvised by closing ventilation openings.

Common questions

Does MERV 13 remove cooking smells?

It can capture some airborne particles when correctly applied, but the MERV rating does not establish removal of odorous gases. Investigate source control, exhaust and pressure first.

How often should activated carbon be replaced?

There is no universal interval. Media selection, loading and operating conditions determine service life. Obtain application-specific guidance and record performance and replacement history.

Can we cover an exhaust grille to stop incoming smells?

Do not block designed ventilation. Apparent reverse flow may indicate a fault or pressure problem that needs investigation. Blocking it can create another problem and may affect safety or compliance.

Sources and scope

Educational guidance only. Product links are to Modern Air Filtration’s catalogue; they do not imply independent endorsement, guaranteed odour elimination or protection from every hazardous gas.

Explore the blog · All insights