Modern Air Filtration Corporation

Sick Building Syndrome: How Ontario Property Managers Should Respond to Indoor Air Complaints

Published

By Modern Air Filtration

Sick Building Syndrome: How Ontario Property Managers Should Respond to Indoor Air Complaints

Take complaints seriously without jumping to a diagnosis

“Sick building syndrome” is a term used to describe building-related patterns of health or comfort complaints when a specific cause has not been established. Occupants may report symptoms such as headaches, eye or throat irritation, fatigue or discomfort that they associate with time in a particular space.

These symptoms are non-specific. They can have several causes, including causes unrelated to the building. A property manager should not diagnose a resident, label an entire property “toxic,” or dismiss concerns because a single inspection found nothing obvious. The appropriate response is to document the pattern, address urgent risks, investigate building conditions and involve qualified professionals where needed.

For Ontario property managers, this is as much a communication and recordkeeping issue as a maintenance issue. A clear response helps residents and staff understand what is known, what is being checked and what happens next. It also reduces the temptation to promise that one product will cure a complex problem.

Begin with safety and clear escalation

Serious breathing difficulty, a suspected gas or chemical release, visible smoke or a carbon monoxide alarm should trigger the relevant emergency response. Do not wait for a routine indoor air quality appointment in those circumstances. Follow emergency-service and building procedures.

People with ongoing or concerning symptoms should seek advice from an appropriate health professional. Building staff should investigate the environment, not collect detailed medical histories or provide treatment advice.

For non-emergency reports, identify a responsible manager and acknowledge the concern. Explain when an initial inspection or update will occur. Set a process appropriate to the urgency and facts rather than publishing a universal timeline that may not fit every incident.

Look for a pattern while protecting privacy

Collect the minimum information needed to investigate: affected location, approximate time and duration, relevant activities, noticeable odours and whether conditions vary with occupancy or equipment schedules. Ask about observable circumstances without pressuring people to disclose diagnoses.

Use an appropriate confidential reporting channel for health-related details. Share aggregated findings with boards and contractors where possible. A report that identifies a floor or operating pattern may be useful; circulating a resident’s private medical history usually is not.

Information to recordWhy it mattersCaution
Location and timeHelps compare zones and operating schedulesA pattern suggests a line of investigation, not proof
Recent cleaning or renovationsMay identify changes in sources or ventilationDo not assume a particular product is responsible
Water leaks or dampnessSupports inspection for moisture-related problemsHidden damage may require specialist assessment
Fan operation and occupancyHelps assess ventilation and distributionA running fan does not establish adequate outdoor air
Corrective work and follow-upShows whether conditions changed after interventionA quieter complaint log alone does not prove resolution

Consider separately whether reports relate to suites, common amenities, on-site offices or staff workplaces. Responsibilities and applicable requirements can differ between residential and workplace settings. Obtain relevant professional advice rather than applying an office standard to every part of a condominium.

Inspect sources, moisture and ventilation together

Start with an organized walkthrough and maintenance-record review. Look for recent changes: renovation work, new cleaning products, stored chemicals, furniture, water incidents, changes in occupancy or revised ventilation schedules.

Inspect accessible moisture sources, condensate drainage and visible damage. If mould or contaminated materials are suspected, arrange an appropriately qualified assessment and remediation plan. Do not simply dry a filter, cover a stain or add fragrance and declare the issue resolved.

Ask the HVAC contractor to confirm outdoor-air delivery, air distribution, exhaust operation and relevant controls. Check that outdoor intakes are not drawing from unsuitable nearby sources. A comfortable temperature reading does not establish that ventilation is adequate.

Health Canada’s office-building guidance treats source control, ventilation, filtration and building stewardship as complementary actions. It includes a structured resolution process and checklists. Its stated scope is non-industrial, non-residential workplaces; use a suitable professional to adapt investigation methods to apartment and condo systems.

Illustrative image of indoor and outdoor air-quality considerations

Illustrative site-library image. A photograph or a single sensor reading cannot diagnose a building-related illness.

Use measurements to answer a specific question

An investigation may benefit from temperature, humidity, airflow, pressure or contaminant measurements, but buying several sensors is not a substitute for a plan. Decide what question each measurement addresses, where it should be taken and how results will be interpreted.

Carbon dioxide can help assess ventilation relative to occupancy in appropriate settings. It does not measure every pollutant and cannot certify a space as healthy. A low reading does not rule out a local source, moisture problem or intermittent exposure.

Particle readings can help identify trends and evaluate some interventions, but sensor limitations and placement matter. Similarly, broad “TVOC” readings do not identify all chemicals or establish an individual’s health risk. For suspected contaminants, sampling methods should be selected and interpreted by a qualified professional.

Avoid buying a large, indiscriminate test panel merely to produce a report. Targeted investigation based on history and inspection is often more informative. Health Canada’s guidance describes circumstances in which an HVAC professional or occupational hygienist may be needed.

Understand what filtration can contribute

Well-selected and maintained particle filters can reduce certain airborne particles passing through the system. Their real-world contribution depends on efficiency, airflow, operating time, filter fit and bypass. Filtration is one control, not a diagnosis or a cure for “sick building syndrome.”

Ordinary particle filters do not correct inadequate outdoor-air supply or remove occupant-generated carbon dioxide. They do not repair moisture intrusion, remove a contaminant source inside a wall or capture every gas. If an odour is part of the complaint, consult the odour-control guide for the distinction between particles and gas-phase media.

When a filter upgrade is justified, check equipment compatibility and measure airflow after installation. Ask for product data rather than relying on the largest MERV number available. Modern Air Filtration’s pleated and high-efficiency filters offer options for different systems, but a contractor must establish the appropriate specification for the building.

Document the change and the reason for it. This helps future maintenance staff avoid substitutions that alter resistance, fit or performance. A purchasing record should support the investigation, not replace it.

Make a corrective-action plan that can be checked

List each confirmed deficiency, proposed action, responsible person and method of verification. Keep unconfirmed hypotheses separate. For example, a blocked condensate drain is an observed defect; a suspected outdoor source may still need investigation.

Where practical, sequence changes so their effects can be assessed. If urgent conditions require several actions at once, record them clearly. Verify mechanical corrections with appropriate testing and follow up with occupants about the original pattern.

Reassessment matters. A problem that occurs when a room is fully occupied may not appear during an empty morning inspection. Seasonal issues may require a later check. Do not close a report solely because a filter was changed or no one contacted the office during a short interval.

Communicate findings honestly

Explain the scope and limitations of the assessment. Say “the contractor verified exhaust operation in the inspected area” rather than “all air in the building is safe.” Share confirmed repairs, outstanding questions and the next review point.

Avoid publishing identifiable health details or blaming residents without evidence. Where further specialist assessment is recommended, explain why. If the investigation finds no clear cause, report that uncertainty and outline a proportionate follow-up process instead of inventing certainty.

A building-wide indoor air quality programme can then incorporate the lessons: clearer maintenance responsibilities, better records, suitable filter specifications and early reporting of leaks or ventilation problems.

Common questions

Is sick building syndrome a diagnosis a manager can make?

No. Managers can record reported patterns and investigate building conditions. Medical assessment belongs with qualified healthcare professionals, and environmental assessment may require specialist expertise.

Can a filter upgrade guarantee symptoms disappear?

No. Symptoms can have multiple causes. Filters address selected airborne particles when properly applied; they do not solve every indoor environmental issue.

When should outside expertise be brought in?

When there is a suspected hazard, persistent or widespread complaints, unresolved moisture, uncertain ventilation performance or a problem beyond the team’s competence. Select the professional for the issue rather than expecting one trade or test to answer every question.

Sources and scope

This is educational information, not medical advice, an engineering assessment or a legal compliance opinion. No filter is presented as a treatment for illness. Product links are to the publisher’s own catalogue.

Explore the blog · All insights